STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New

$840.53 Buy It Now or Best Offer
free,30-Day Returns

Seller Store ninebooting
(0) 0.0%,

Location: China
Ships to: US,
Item: 395669316151

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money Back
STM-IV(B):STM-IV(B)
input voltage:220V 50Hz
power:10W
measurement range:40.2 ~ 141.0KU (KU value), 27cP-5250cP 32 ~ 1099g
Material:Rusty iron spray
measurement accuracy:1.50% of full range
Type:Viscosity Meter Tester Viscometer
measurement repeatability:the full range of 1.50%
the rotational speed of the mixing axis:200r/min + 1r/min
container capacity:About 500ml
Unbranded:Unbranded
MPN:Does not apply

STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New 1. Summary: The stom viscometer is used for the determination of paint and other KU indicating the viscosity of the coating. The instrument can display the KU value of the measured sample viscosity or the load value associated with the KU value (unit: G). The instrument is controlled by a computer. The blade of a stirred blade (also called a rotor) is driven by a constant speed motor at a speed of 200r/min. The resistance moment of the impeller in the measured sample is converted by a computer to the KU value. (Krebs (Krebs) unit (KU) is a logarithmic function of the load required to produce 200r/min speed, which is generally used to represent the speed of the 200r/min. It is used for the viscosity of the brush and roll. The operator only needs to enter the stirred blade into the measured depth and read the KU value of the sample or the relative load value directly from the instrument. The operator is simple and convenient to operate. The rotor is not needed to change the rotor in the whole measurement range (the rotor is the main part of the connection sensor, the improper installation will affect the measurement accuracy). This instrument is in accordance with the ASTM-D562 and GB/T9269-2009 standards. Two. The main technical parameters: 1. Measurement range: 40.2 ~ 141.0KU (KU value), 27cP-5250cP 32 ~ 1099g (load value); 2. Measurement accuracy: 1.50% of full range; 3. Measurement repeatability: the full range of 1.50%; 4. The rotational speed of the mixing axis: 200r/min + 1r/min; 5. Container capacity: About 500ml; 6. Input voltage: 220V 50Hz; 7. Power: 10W; 8.Display:Digital 9.Temperature Display: Yes 10.Time Display: Yes 11.RS232C Port: Yes 12.Software: Yes 8. Shape size: 210mm x 180mm x 500mm (L*W*H); 9. Weight: 10kg. Three. Experimental environment: 1. the instrument should be placed on a strong and smooth surface away from strong airflow, strong magnetic field, strong electric field and strong electric pulse interference. 2. in order to ensure the safety of the operator, the power outlet in the laboratory should be grounded reliably. 3. the temperature in the laboratory should be 23 C + 2 C, and the relative humidity should be less than 75%.The temperature of the 4. sample should be 23 + 0.2 C. Four. Operation and use: 1. remove the instrument from the packaging box and put it on the worktable. 2. remove the stirring blade from the packing box, insert it into the sleeve of the rotating shaft, and fix it with the top tightening screw. 3. plug in the power plug, open the power switch on the back, the system starts to self check, the system will enter the standby state after the completion of the self test, and the display will display “-“. 4. put the tested sample in the container which the instrument comes from, the liquid level is about 10mm from the container port. 5. put the container on the container seat on the container to be tested and select the unit of measurement (“KU”) to indicate the KU value of the sample to be tested, and “GM” to indicate the load value. Press down the lifting handle, immerse the stirring blade into the sample to be tested, and the marking line on the blade axis of the impeller is aligned with the liquid level, and the instrument automatically starts running. 6. after a few seconds, the monitor displays the viscosity value of the sample to be measured, which can be read at this time. (the sample must be stirred for a few seconds to achieve dynamic balance, and the data displayed can be considered accurate, without the display of the data before the instrument “–“). 7. after the measurement is completed, the lifting handle is lifted to the height, and there is a limited bit device near the highest position, so that the instrument can always be kept in this position. The instrument stops turning and reenters the standby state. 8. the instrument has built-in smart display stabilisation program, so that each reading is stable and readable to the operator. If you want to measure different units of measurement without shutting down, just switch the selector switch to the unit of measurement you need. Five. Note: 1. there are precise measuring parts in the instrument cabinet. 2. this instrument is a special instrument. Please do not open the instrument shell by itself, so as not to affect the accuracy of instrument measurement. When the 3. instruments are temporarily unused, the lifting handle of the instrument should be kept on the high position limit unit, and it should not be placed in a lower position, otherwise the phenomenon of inflexibility may be produced. 4. every year, companies should be checked regularly or sent to the metrological supervision department for testing once. If you need 110V, please contact us Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support. Shipping Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it. We are not responsible for undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address. Contact us We work 6 Days a week From 9:00am – 6:00pm Monday – Saturday CHINA Time.Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.

Frequently Asked Questions About STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New in My Website

zeajans.com is the best online shopping platform where you can buy STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New from renowned brand(s). zeajans.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New on zeajans.com?

Frequently Asked Questions About STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New in My Website

What are the best-selling STM-IV(B) Digital Display Stormer Viscometer for Paints Coatings Inks 220V New on zeajans.com?

Bir yanıt yazın Yanıtı iptal et

Bilmek İstediğiniz Başka Bir Konu Var mı?

05344192513