MSE PRO PMN-PT Single Crystals and Substrates, PMNT

$136.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Tucson, Arizona, United States
Ships to: US,
Item: 254906731763

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
MSE Supplies LLC:MSE Supplies LLC
MPN:N/A

eBay MSE PRO PMN-PT Single Crystals and Substrates, PMNT PMNT (PMN-PT) Single Crystals and Substrates, Single Side Polished Chemical formula: Pb(Mg1/3Nb2/3)O3-PbTiO3 Standard specifications: Crystal growth method for PMN-PT crystals: Bridgman method Cut types (crystal orientations): (001), (110), (111) with miscut precision of +/- 0.5 degree Compositions: Type 1: PbTiO3 content 28-30 mol% Type 2: PbTiO3 content 30-34 mol% Single side polished Ra ~ 5 nm, back side fine ground (customized surface polishing is available upon request) Sizes: 10 x 10 x 0.5 mm or other custom shapes and sizes upon request. Available sizes: length: 1-70mm, width: 1-30mm Poling: Standard PMN-PT substrates are not poled. Poling service is available upon request. Surface electrode: Coating with surface electrode is available at an additional cost upon request. Typical electrode coating: silver (Ag) or gold (Au) by sputtering with 200-300 nm thickness. PMN-PT crystals, substrates and wafers with customized sizes, shapes, orientation, poling directions are available upon request. Please contact us for quotation. PMN-PT ceramic powder, 325 mesh, is also available. Click here to order. Specifications of PMN-PT single crystals Parameter PMN-PT PMN-PT cut-Type Poling direction Type 1 Type 2 PbTiO3 content (mol%) 28-30 30-34 (closer to 30-31) (001) * The two edges of10x10 mm2 surfaceare parallel to <100>and <010>respectively. <001> Dielectric constant 4000-5500 5000-8000 Piezoelectric constant d33 (pC/N) 1200-1600 1500-2800 Piezoelectric constant d32 (pC/N) -(600-900) -(800-1100) Electromechanical coupling factor k33 0.87-0.92 0.88-0.94 Phase transition temperature Trt (℃) 90-100 80-95 Curie temperature Tc (℃) 130-140 140-160 Coercive field Ec (kV/cm) 2.0-2.5 2.0-2.5 Density (g/cm3) 8.1 8.1 Dielectric constant 2500-4000 3500-5000 (110) ** The line mark on the substrate surface indicates that the edge parallel to the line is along the <100> direction. <110> Piezoelectric constant d33 (pC/N) 700-1100 1000-1800 Piezoelectric constant d32 (pC/N) -(1100-1600) -(1500-2200) Piezoelectric constant d15 (pC/N) 2000-3500 3000-4500 <1-10> Piezoelectric constant g15 (10-3Vm/N) 45-55 55-65 Piezoelectric constant d15 (pC/N) 3000-4500 4000-7000 <111> Piezoelectric constant g15 (10-3Vm/N) 45-55 55-65 Electromechanical coupling factor k32 0.86-0.90 0.87-0.92 <110> Curie temperature Tc (℃) 130-140 140-160 Available sizes length: 1-70mm, width: 1-30mm; maximum diameter: 60mm Available thickness 0.1-10 mm Shapes Plates, rings, rods, etc. Surface finish Single side polished (SSP) is standard, double side polished (DSP) is optional Electrodes (optional) Silver or Gold To find (001) in-plane orientation for TEM measurement Using a polarizing microscope: For the (110) wafer, the angle between two extinction bits is 71 degrees or 109 degrees, the direction of the 71 degree bisector is the (110) orientation and the direction of the 109 degree angle bisector is the (001) orientation. Frequency constant (Nt) values of PMN-PT single crystal: Nt for PMN-PT (001) is ~2270; Nt for PMN-PT (110) is ~2450. As a novel kind of piezoelectric materials, relaxor-based ferroelectric single crystals exhibit ultrahigh piezoelectric performances, which surpass largely those of conventional PZTs piezoelectric ceramics. Our company can provide three generations of relaxor-based piezocrystals, i.e. Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as PMN-PT or PMNT), Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as PIN-PMN-PT or PIMNT) and Mn doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as Mn:PIN-PMN-PT or Mn:PIMNT) in large scale. High quality, large size and uniform crystals are available, which can satisfy various ultrasonic transducers in medical ultrasonic imaging, nondestructive examination and energy harvesting, solid-state actuators and composites such as magnetoelectric ones. The crystals have also good electro-optic properties and excellent pyroelectric properties, which can find application in the fields of electro-optic modulators in optical communications and pyroelectric devices in infrared detection and so on. The main performance specifications are presented in the above tables. Various cut-type samples can be offered. Please contact us by email to discuss your requirements. Reference Reading: Ferroelectrics: Applicationsedited by Mickaël Lallart References: Study on dielectric and piezoelectric properties of 0.7 Pb(Mg1/3Nb2/3)O3-0.3 PbTiO3 single crystal with nano-patterned composite electrode, J Appl Phys. 2013 Sep 21; 114(11): 114103. doi: 10.1063/1.4821517 Growth and properties of PMN–PT single crystals, Physica C: Superconductivity and its Applications, Volumes 364–365, November 2001, Pages 678-683 Pb(Mg1/3Nb2/3)O3–PbTiO3 (PMN-PT) Material for Actuator Applications, Smart Materials Research, Volume 2011, https://doi.org/10.1155/2011/452901 Typical academia customers of MSE Supplies PMN-PT crystals and substrates: École polytechnique fédérale de Lausanne (EPFL) in Swiss Vellore Institute of Technology in India Gwangju Institute of Science and Technology in South Korea Brigham Young University in the USA Indian Institute of Science in India University Brest in France Indian Institute of Technology Bombay in India The University of Texas at Austin in the USA University of Wisconsin-Madison in the USA ISTITUTO NAZIONALE DI RICERCA METROLOGICAI.N.RI.M in Italy AGH University of Science and Technology in Poland TEL-AVIV UNIVERSITY in Israel University of California San Diego in the USA Cornell University in the USA Johannes Gutenberg University in Germany MSE PRO PMN-PT Single Crystals and Substrates, PMNT PMNT (PMN-PT) Single Crystals and Substrates, Single Side Polished Chemical formula: Pb(Mg1/3Nb2/3)O3-PbTiO3 Standard specifications: Crystal growth method for PMN-PT crystals: Bridgman method Cut types (crystal orientations): (001), (110), (111) with miscut precision of +/- 0.5 degree Compositions: Type 1: PbTiO3 content 28-30 mol% Type 2: PbTiO3 content 30-34 mol% Single side polished Ra ~ 5 nm, back side fine ground (customized surface polishing is available upon request) Sizes: 10 x 10 x 0.5 mm or other custom shapes and sizes upon request. Available sizes: length: 1-70mm, width: 1-30mm Poling: Standard PMN-PT substrates are not poled. Poling service is available upon request. Surface electrode: Coating with surface electrode is available at an additional cost upon request. Typical electrode coating: silver (Ag) or gold (Au) by sputtering with 200-300 nm thickness. PMN-PT crystals, substrates and wafers with customized sizes, shapes, orientation, poling directions are available upon request. Please contact us for quotation. PMN-PT ceramic powder, 325 mesh, is also available. Click here to order. Specifications of PMN-PT single crystals Parameter PMN-PT PMN-PT cut-Type Poling direction Type 1 Type 2 　　 PbTiO3 content (mol%) 28-30 30-34 (closer to 30-31) (001) * The two edges of 10×10 mm2 surface are parallel to <100> and <010> respectively. <001> Dielectric constant 4000-5500 5000-8000 Piezoelectric constant d33 (pC/N) 1200-1600 1500-2800 Piezoelectric constant d32 (pC/N) -(600-900) -(800-1100) Electromechanical coupling factor k33 0.87-0.92 0.88-0.94 Phase transition temperature Trt (℃) 90-100 80-95 Curie temperature Tc (℃) 130-140 140-160 Coercive field Ec (kV/cm) 2.0-2.5 2.0-2.5 Density (g/cm3) 8.1 8.1 　　　　　 Dielectric constant 2500-4000 3500-5000 (110) ** The line mark on the substrate surface indicates that the edge parallel to the line is along the <100> direction. <110> Piezoelectric constant d33 (pC/N) 700-1100 1000-1800 Piezoelectric constant d32 (pC/N) -(1100-1600) -(1500-2200) Piezoelectric constant d15 (pC/N) 2000-3500 3000-4500 <1-10> Piezoelectric constant g15 (10-3Vm/N) 45-55 55-65 Piezoelectric constant d15 (pC/N) 3000-4500 4000-7000 <111> Piezoelectric constant g15 (10-3Vm/N) 45-55 55-65 Electromechanical coupling factor k32 0.86-0.90 0.87-0.92 <110> Curie temperature Tc (℃) 130-140 140-160 　　　　　 Available sizes length: 1-70mm, width: 1-30mm; maximum diameter: 60mm Available thickness 0.1-10 mm Shapes Plates, rings, rods, etc. Surface finish Single side polished (SSP) is standard, double side polished (DSP) is optional Electrodes (optional) Silver or Gold To find (001) in-plane orientation for TEM measurement Using a polarizing microscope: For the (110) wafer, the angle between two extinction bits is 71 degrees or 109 degrees, the direction of the 71 degree bisector is the (110) orientation and the direction of the 109 degree angle bisector is the (001) orientation. Frequency constant (Nt) values of PMN-PT single crystal: Nt for PMN-PT (001) is ~2270; Nt for PMN-PT (110) is ~2450. As a novel kind of piezoelectric materials, relaxor-based ferroelectric single crystals exhibit ultrahigh piezoelectric performances, which surpass largely those of conventional PZTs piezoelectric ceramics. Our company can provide three generations of relaxor-based piezocrystals, i.e. Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as PMN-PT or PMNT), Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as PIN-PMN-PT or PIMNT) and Mn doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (abbreviated as Mn:PIN-PMN-PT or Mn:PIMNT) in large scale. High quality, large size and uniform crystals are available, which can satisfy various ultrasonic transducers in medical ultrasonic imaging, nondestructive examination and energy harvesting, solid-state actuators and composites such as magnetoelectric ones. The crystals have also good electro-optic properties and excellent pyroelectric properties, which can find application in the fields of electro-optic modulators in optical communications and pyroelectric devices in infrared detection and so on. The main performance specifications are presented in the above tables. Various cut-type samples can be offered. Please contact us by email to discuss your requirements. Reference Reading: Ferroelectrics: Applications edited by Mickaël Lallart References: Study on dielectric and piezoelectric properties of 0.7 Pb(Mg1/3Nb2/3)O3-0.3 PbTiO3 single crystal with nano-patterned composite electrode, J Appl Phys. 2013 Sep 21; 114(11): 114103. doi: 10.1063/1.4821517 Growth and properties of PMN–PT single crystals, Physica C: Superconductivity and its Applications, Volumes 364–365, November 2001, Pages 678-683 Pb(Mg1/3Nb2/3)O3–PbTiO3 (PMN-PT) Material for Actuator Applications, Smart Materials Research, Volume 2011, https://doi.org/10.1155/2011/452901 Typical academia customers of MSE Supplies PMN-PT crystals and substrates: École polytechnique fédérale de Lausanne (EPFL) in Swiss Vellore Institute of Technology in India Gwangju Institute of Science and Technology in South Korea Brigham Young University in the USA Indian Institute of Science in India University Brest in France Indian Institute of Technology Bombay in India The University of Texas at Austin in the USA University of Wisconsin-Madison in the USA ISTITUTO NAZIONALE DI RICERCA METROLOGICA I.N.RI.M in Italy AGH University of Science and Technology in Poland TEL-AVIV UNIVERSITY in Israel University of California San Diego in the USA Cornell University in the USA Johannes Gutenberg University in Germany × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like 1.1 mm 12~15 Ohm/Sq ITO Coated Glass Substrate 10 mm x 10.5 mm Fe-Doped Semi-Insulating Gallium Nitride Single Crystal C Plane 10 mm x 10.5 mm, Undoped, N-type, Gallium Nitride Single Crystal Substrate C pla 100 ml D65 X H76 Y-Stabilized Zirconia Milling Jars for Planetary Mills Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © MSE Supplies LLC Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. Additional Information: “Broken or damaged items must be reported immediately upon receiving your package (within 5 business days upon delivery). All materials and equipment are considered as received in good condition upon signature of delivery confirmation. Please inspect these items for damage prior to signing off on the condition. If it becomes necessary to return a damaged item to MSE Supplies, please contact us for a Return Merchandise Authorization (RMA) number within 30 days of receipt of the product. MSE Supplies must receive the product within 15 days of MSE Supplies issuing the Return Merchandise Authorization (RMA). The product must be in the original packaging or the return will be rejected. RMA numbers must appear on the packing list and items being returned must be packaged and shipped in accordance with all applicable regulation. All items are subject to a 25% restocking fee. \r\n\r\nItems not returnable for credit include: open or damaged containers; materials past their expiration date or with an expiration date too short for resale; custom or special orders; non-recurring engineering (NRE) cost charged to the order, and chemicals of any type. Any supplies or equipment that have been uséd and are being returned for a warranty repair may require that a decontamination form be filled out. Please contact MSE Supplies for this form.” eBay integration by

Frequently Asked Questions About MSE PRO PMN-PT Single Crystals and Substrates, PMNT in My Website

zeajans.com is the best online shopping platform where you can buy MSE PRO PMN-PT Single Crystals and Substrates, PMNT from renowned brand(s). zeajans.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling MSE PRO PMN-PT Single Crystals and Substrates, PMNT on zeajans.com?

Frequently Asked Questions About MSE PRO PMN-PT Single Crystals and Substrates, PMNT in My Website

What are the best-selling MSE PRO PMN-PT Single Crystals and Substrates, PMNT on zeajans.com?

Bir yanıt yazın Yanıtı iptal et

Bilmek İstediğiniz Başka Bir Konu Var mı?

05344192513