ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs

$11.44 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 324110629035

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
ALPS:ALPS
Product Colour:see description
Brand Compatibility:Description
Tension:Description
Models:PM-250-Z
MPN:PM-250-Z
Connectivity:not applicable
Type:electric guitars
Battery Technology:Description
UPC:Does not apply

eBay ALPS 2x250K blend pot, 10mm shaft, M7x0.75 thread, blends 2 inputs, made in Japan potentiometer values: Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter. tapers: The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume of audio or logarithmic pot will work best for volume applications. Shaft: A split, knurled shaft will hold most knobs. Sometimes the knob is mounted using a set screw. You should order a solid shaft pot, or align the set screw with the split for correct mounting. Bushing: The standard bushing diameter is 3/8″ or 9.5mm, used in most made in USA guitars. Another industry standard is M8, as used by guitar builders outside of the USA. When space is limited mini pots are used with a shaft diameter of 7mm. The standard bushing length is .375″ for inch type pots and 10mm for metric type pots. Using two nuts it is very easy to set the correct bushing length for knob placement. Specially for pickguard (ST, PB) or control plate mount (TE, JB) the .250″ short bushing will fit perfectly using only one nut. For use with a thick or carved top (LP USA) you should order a bushing length of .750″. CTS is (and has been since the 50’s) a factory standard for most USA brands like FENDER and Gibson. Alpha is a good alternative, nowadays used as a factory standard by Ibanez, Epiphone and SQUIER . Seen cheaper elsewhere? No problem – send us your price proposal! +++3 years guarantee+++ All of our items have a 30-day right of return without additional Reason. Sheet music, reading material and software are non-returnable. The general terms and conditions of Zoundhouse GmbH& Co.KG apply. The European Union provides an online platform (OS platform) for the out-of-court settlement of consumer disputes https://ec.europa.eu/consumers/odr When purchasing multiple items from us: Place the items in the shopping cart and select Request total from buyer at the top right. If you intend to buy multiple articles: Put them into your shopping cart and choose combined shipping(up right)on your checkout. BREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice. From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%). Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter. The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume of audio or logarithmic pot will work best for volume applications. The standard bushing length is .375″ for inch type pots and 10mm for metric type pots. Using two nuts it is very easy to set the correct bushing length for knob placement. Specially for pickguard (ST, PB) or control plate mount (TE, JB) the .250″ short bushing will fit perfect BREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice. From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).

Frequently Asked Questions About ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs in My Website

zeajans.com is the best online shopping platform where you can buy ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs from renowned brand(s). zeajans.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs on zeajans.com?

Frequently Asked Questions About ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs in My Website

What are the best-selling ALPS 2x250K Blend-Poti, 0 3/8in Shaft, M7x0, 75 Thread, Überblendet 2 Inputs on zeajans.com?

Bir yanıt yazın Yanıtı iptal et

Bilmek İstediğiniz Başka Bir Konu Var mı?

05344192513