3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2

$19.92 Buy It Now or Best Offer
free,30-Day Returns

Seller Store balamer
(2753) 98.4%,

Location: Chino, California
Ships to: US,
Item: 356088192801

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Analog Bandwidth:120MHz (CH1 only); 60MHz (CH1+CH2)
Diode:0.0V~3.3V,3.3V higher display OL
DC current:600mA/10A,±(2%+5)
Generator waves:sin/square/triangular
ASIN:B0CFQKJC8C
Material:ABS
MPN:Does not Apply
DC Offset:±2%
Generator Vol:Generator Vol
Name:3in1 Digital Oscilloscope
Unbranded/Generic:Unbranded/Generic
Oscilloscope Type:Digital Oscilloscope
Resistance:600.0Ω±(1.5%+3); 6.000kΩ/60.00kΩ/600.0kΩ±(1%+3); 6.000ΜΩ,±(1.5%+5); 60.00ΜΩ,±(3%+3
Peakvoltage:±40V (1x),±400V (10x)
DCvoltage:600mV/6.00V/60.0V/600V/750V,±(0.5%+3)
Equivalent sampling:500M
Real-time sample rate:200Msps
Time Base:5ns- 10s
Capacitance:60.00nF/600.0nF/6.000μF±(5%+5),60.00μF/600.0μF±(10%+5)
AC current:600mA/10A,±(3%+5)
Generator freq:1Hz-2MHz
Display:3.2 inches IPS color screen

3in1 Multimeter 3in1 design, this product ingeniously integrates digital oscilloscope, multimeter, and signal source functions in one device. Equipped with a 3.2-inch IPS display. With 120MHz bandwidth and 250MSa/s sampling rate. 3 trigger modes were designed, automatic, single, and normal. Multifunctional design, supports sensitivity and time base adjustment, automatic mode adjustment, 2-channel waveform analysis, cursor measurement, reference waveforms, FFT spectrum, reference waveforms, waveform save and view. With DC/ACvoltage, DC/ACcurrent, resistance, capacitance, diode, and continuity test. Built-in waveform signal generator, it can output sinewave, squarewave, trianglewave, and so on. Features: 【3In1 Design with IPS Display】: This product ingeniously integrates digital oscilloscope, multimeter, and signal generator functions into one device. 3.2-inch clear-definition IPS display, high sensitivity full view display, channel 2 waveforms can be set to green/ cyan/purple. 【Signal Generator】: Built-in waveform signal generator, it can output sinewave, squarewave, trianglewave, and so on. The voltage amplitude is 2.5V, the frequency is adjustable from 0-2Mhz, and the squarewave duty cycle is adjustable from 1% to 99%. 【High-precise Multimeter】: Built-in true RMS multimeter, that supports quick software calibration. With DC/ACvoltage, DC/ACcurrent, resistance, capacitance, diode, and continuity test. When measuring low voltage /resistance/continuity, the oscilloscope and multimeter functions can be used simultaneously (small window in the upper right corner). 【Digital Oscilloscope Function】: Dual channel oscilloscope function, with 120MHz bandwidth and 250MSa/s sampling rate. With perfect trigger function (automatic, single, normal). Supports sensitivity and time base adjustment, automatic mode adjustment, 2-channel waveform analysis, cursor measurement, reference waveforms, FFT spectrum, reference waveforms, waveform save and view. 【Sensitivity and Time Base】: The oscilloscope will automatically detect the signal and adjusts the ranges. Support manual adjustment of the waveform vertically and horizontally. The vertical sensitivity indicates the voltage in the vertical direction, and it is adjusted by the mV and V buttons to adapt to different voltages. The time base represents the time in the horizontal direction. It is adjusted by the S and NS buttons to accommodate different frequencies. In the stop mode, the user can move the waveform left and right. 【Two Automatic Modes Adjustment】: Support one-button automatic and fully-automatic mode, no complicated operation, you can quickly detect and display the waveform. In fully automatic mode, no keystrokes are required, and continuous automation is performed. 【High Bandwidth & Sampling Rate】: The real-time sampling rate is 250MSa/s, dual-channel mode bandwidth is halved to 60Mhz. 【Dual Channel】: With dual-channel mode, which can measure and display two signal waveforms at the same time for waveform comparison and analysis. 【XY Mode for Cursor Measurement】: The XY mode is an imaging formed by combining the waveforms of two channels and is commonly used to display the phase difference or frequency relationship between two signals. Supports X cursor and Y cursor measurement. The horizontal cursor can be used, for example, to measure the interval time between two pulses. The vertical cursor can be used to measure the voltage and the voltage difference at any two locations. 【FFT Spectrum】: FFT (Fast Fourier Transform) is an algorithm that transforms waveforms in the time domain to the frequency domain, which can be used to analyze the frequency component in waveforms. Linear and logarithmic displays are supported. Note: FFT can only display spectrograms, frequency measurement is not supported. 【Reference Waveform】: Support for latching reference waveforms, statically displaying the current waveform on the screen, while the dynamic waveforms are continue to update normally. And can be used for reference and comparison between multiple waveforms. 【Waveform Save/View】: Save the screen waveform with one click, enter the picture browsing page, you can click the thumbnail for full-screen observation and also can delete the unwanted waveform chart at will. 【Safer Design】: Use an isolation transformer and isolation optocoupler chip to isolate the multimeter from the oscilloscope, so you dont have to worry about common ground wiring. (When measuring high voltage, the multimeter, and oscilloscope cannot be used at the same time). 【Wide Applications】: It can easily handle measurement in various fields, widely used in the fields of testing and debugging of electronic circuits, troubleshooting and repairing of elect Specifications: Name: 3in1 Digital Oscilloscope Material: ABS Display: 3.2 inches IPS color screen Battery: 1 * built-in 2500mah rechargeable lithium battery (included) Charging: TYPE-C 5V Language: Chinese/English Oscilloscope: Real-time sample rate: 200Msps Analog Bandwidth: 120MHz (CH1 only); 60MHz (CH1+CH2) Equivalent sampling: 500M Rise time: <3ns Storage: 128Kb Impedance: 1ΜΩ Time Base: 5ns- 10s Peakvoltage: ±40V (1x), ±400V (10x) Trigger mode: auto/normal/single Trigger type: rise/fall Display mode: YT /XY/roll Persistence: none/1s/∞ Auto mode: oneKey-auto/fully-auto Sensitivity: X1:10mV/div~10V/div; X10:100mV/div~100V/div Measure items: 14 types DC Offset: ±2% XY mode: yes Screenshot: yes Frequency: ±0.01% Zoom mode: yes FFT: yes Generator waves: sin/square/triangular Generator Vol: 2.5V±0.05 Generator freq: 1Hz-2MHz Multimeter: DCvoltage: 600mV/6.00V/60.0V/600V/750V, ±(0.5%+3) AC voltage: 600mV/6.00V/60.0V/600V, ±(1%+3) DC current: 600mA/10A, ±(2%+5) AC current: 600mA/10A, ±(3%+5) current note: 600mA hole with 1A fuse, 10A hole without fuse Resistance: 600.0Ω±(1.5%+3); 6.000kΩ/60.00kΩ/600.0kΩ±(1%+3); 6.000ΜΩ, ±(1.5%+5); 60.00ΜΩ, ±(3%+3) Capacitance: 60.00nF/600.0nF/6.000μF±(5%+5), 60.00μF/600.0μF±(10%+5) Diode: 0.0V~3.3V, 3.3V higher display OL Continuity: Sound at 50Ω and below Item size: 145 * 86 * 32mm / 5.71 * 3.39 * 1.26in Package size: 220 * 150 * 70mm / 8.66 * 5.91 * 2.76in Package weight: 600g / 1.32lb Packing List: 1 * 3in1 Digital Oscilloscope 1 * Pair of Test Pen 2 * Cable 1 * Charging Cable 1 * Set of Accessory ANENG SZ02 Features: Intelligent Multimeter with Multiple Functions: it can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc. Dual Flashlights Design: two torch at the top for auxiliary lighting up the working area in the low lit or dark environment, not afraid of dark when working, and it will automatically turned off after about 5 minutes. NCV Non-contact Voltage Detection: place the NCV sensor closer to the measured cable, and the multimeter can detect whether the voltage is greater than 90V AC voltage. When the AC voltage being detected, the meter buzzer alarms and the LCD analog bar displays the induction intensity. Safety Operation: built-in overload protection fuse, smart anti-burn. Meet the DC/AC 600V CAT III overvoltage standard, and double insulation protection(class II). Large LCD Screen & Easy to Control: soft push buttons is easy to operate, the large LCD display screen with bright backlight, convenient to check the measured data at a glance even in the dark environment. Compact & Accurate: as small as a mobile phone, convenient to use and carry around. Built-in with high performance chip to ensure its accuracy. Silicone Protective Case: protected with a soft silicone cover, you can use the meter at various condition without worrying it from falling down or scratch by hardware. Specifications: AC Voltage: 600mV-999.9V DC Voltage: 600mV-999.9V AC Current: 20mA~10A DC Current: 20mA~10A Resistance: 0Ω~99.99MΩ Capacitance: 0nF~99.99mF Hz: 0~1000Hz Temperature: -40~1000 (-40~1832℉) Diode: Yes Buzzer: Yes NCV Induction: Yes Data Hold: Yes Zero/Fire Wire: Yes Color: Red Material: ABS Display: LCD Max. Display: 9999 digits Range: Auto range Sampling Time: About 3 times/second Auto-off: 15 minutes Working Altitude: Max. 2000m Operating Temperature: 0~40℃ Storage Temperature: -10~50℃ Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 127 * 67 * 29.2mm / 5.00 * 2.64 * 1.15in Item Weight: 131g / 4.62oz Package Weight: 242g / 8.54oz Package Size: 13.5 * 7.5 * 6.6cm / 5.31 * 2.95 * 2.60in Package List（ANENG SZ02）: 1 * Multimeter 1 * Pair of Test Lead 1 * Thermocouple 1 * Manual (English) Your satisfaction is our eternal pursuit Your satisfaction is our eternal pursuit

Frequently Asked Questions About 3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2 in My Website

zeajans.com is the best online shopping platform where you can buy 3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2 from renowned brand(s). zeajans.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2 on zeajans.com?

Frequently Asked Questions About 3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2 in My Website

What are the best-selling 3 in 1 Handheld Oscilloscope Multimeter Generator 120Mhz Bandwidth 250MSa/s R1G2 on zeajans.com?

Bir yanıt yazın Yanıtı iptal et

Bilmek İstediğiniz Başka Bir Konu Var mı?

05344192513