$149.45 Buy It Now or Best Offer
free,30-Day Returns

Seller Store topcn-autoparts
(184944) 99.0%,

Location:
Ships to: US,
Item: 314762689317

状態:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … 続きを読む状態についてNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. すべての状態の定義を見る新しいウィンドウまたはタブに表示されます
Placement on Vehicle:Front, Left, Right, Upper, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Stamped
Custom Bundle:Yes
Interchange Part Number:K80327, K80328, K90448, K90449
Bundle Description:Control Arm ,Control Arm,Sway Bar,Ball Joint,Tie Rod End
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly,Tie Rod Ends
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does Not Apply
Manufacturer Part Number:TA80944506P
Adjustable:Yes
Greasable or Sealed:Greasable
Kit Included:12 Pieces
Surface Finish:Premium Quality
Cross Part Number:MK80327 MK80328 MK90123 SK90123 MK9802 MEV299
Cross Reference Part Number:K90123, K9802, ES3331R, ES3332R, EV299
Partlink Number:1992 1993 1994 1995 1996 1997 1998 1999 2000 2001
Fitment:For Acura Integra,Honda Civic Del Sol Passenger Driver Side
Partslink-number 1:Stabilizer / Sway Bar End Link, Lower Ball Joint
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On

eBay 1.Fit For 1992-1995 Honda Civic All Models 1993-1997 Honda Civic del Sol All Models 2.Package Includes: 1x Part# Front Right Upper Control Arm With Ball Joint Assembly (Passenger) – K90448 1x Part# Front Left Upper Control Arm With Ball Joint Assembly (Driver) – K90449 1x Part# Front Right Lower Control Arm (Passenger) – K80327 1x Part# Front Left Lower Control Arm (Driver) – K80328 2x Part# Front Stabilizer/Sway Bar End Links – K90123 2x Part# Front Lower Ball Joints – K9802 2x Part# Front Inner Tie Rods Ends – EV299 1x Part# Front Right Outer Tie Rod End (Passenger) – ES3331R 1x Part# Front Left Outer Tie Rod End (Driver) – ES3332R Notes 12x Fits 92-95 Honda Civic 93-97 Honda Civic del Sol Control Arm Tierod Sway Bar 1.Fit For 1992-1995 Honda Civic All Models 1993-1997 Honda Civic del Sol All Models 2.Package Includes: 1x Part# Front Right Upper Control Arm With Ball Joint Assembly (Passenger) – K90448 1x Part# Front Left Upper Control Arm With Ball Joint Assembly (Driver) – K90449 1x Part# Front Right Lower Control Arm (Passenger) – K80327 1x Part# Front Left Lower Control Arm (Driver) – K80328 2x Part# Front Stabilizer/Sway Bar End Links – K90123 2x Part# Front Lower Ball Joints – K9802 2x Part# Front Inner Tie Rods Ends – EV299 1x Part# Front Right Outer Tie Rod End (Passenger) – ES3331R 1x Part# Front Left Outer Tie Rod End (Driver) – ES3332R Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Stamped Custom Bundle : Yes Interchange Part Number : K80327, K80328, K90448, K90449 Bundle Description : Control Arm ,Control Arm,Sway Bar,Ball Joint,Tie Rod End OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA80944506P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 12 Pieces Surface Finish : Premium Quality Cross Part Number : MK80327 MK80328 MK90123 SK90123 MK9802 MEV299 Cross Reference Part Number : K90123, K9802, ES3331R, ES3332R, EV299 Partlink Number : 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 Fitment : For Acura Integra,Honda Civic Del Sol Passenger Driver Side Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Control Arm Construction : Stamped Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Rear Trunk Hatch Liftgate Lift Supports Springs Struts For Scion tC 2005-2010 USD 16.49 2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob USD 19.23 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 16.49 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 23.39 Newly Listed 4x New Front Lower Control Arm Sway Bar Suspension Kit For 2001-2006 Mazda MPV USD 130.79 6pcs Front & Rear Sway Bars Inner Outer Tie Rod Links For 1989-1991 92 GEO Prizm USD 40.69 Roof Rack Cross Bars Fits Chevrolet Chevy Trailblazer 2021-2023 Carrier luggage USD 110.99 Roof Rack Cross Bars for 2023 Honda CRV CR-V w Side Roof Rails USD 150.99 6pcs Front Inner & Outer Tie Rod Sway Bar Links Fits 2007-2014 Chrysler Sebring USD 48.77 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 12x Fits 92-95 Honda Civic 93-97 Honda Civic del Sol Control Arm Tierod Sway Bar 1.Fit For 1992-1995 Honda Civic All Models 1993-1997 Honda Civic del Sol All Models 2.Package Includes: 1x Part# Front Right Upper Control Arm With Ball Joint Assembly (Passenger) – K90448 1x Part# Front Left Upper Control Arm With Ball Joint Assembly (Driver) – K90449 1x Part# Front Right Lower Control Arm (Passenger) – K80327 1x Part# Front Left Lower Control Arm (Driver) – K80328 2x Part# Front Stabilizer/Sway Bar End Links – K90123 2x Part# Front Lower Ball Joints – K9802 2x Part# Front Inner Tie Rods Ends – EV299 1x Part# Front Right Outer Tie Rod End (Passenger) – ES3331R 1x Part# Front Left Outer Tie Rod End (Driver) – ES3332R Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Stamped Custom Bundle : Yes Interchange Part Number : K80327, K80328, K90448, K90449 Bundle Description : Control Arm ,Control Arm,Sway Bar,Ball Joint,Tie Rod End OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA80944506P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 12 Pieces Surface Finish : Premium Quality Cross Part Number : MK80327 MK80328 MK90123 SK90123 MK9802 MEV299 Cross Reference Part Number : K90123, K9802, ES3331R, ES3332R, EV299 Partlink Number : 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 Fitment : For Acura Integra,Honda Civic Del Sol Passenger Driver Side Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Partslink-number 1 : Stabilizer / Sway Bar End Link, Lower Ball Joint Control Arm Construction : Stamped Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.

Frequently Asked Questions About 12x Fits 92-95 Honda Civic 93-97 Honda Civic del Sol Control Arm Tierod Sway Bar in My Website

zeajans.com is the best online shopping platform where you can buy 12x Fits 92-95 Honda Civic 93-97 Honda Civic del Sol Control Arm Tierod Sway Bar from renowned brand(s). zeajans.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 12x Fits 92-95 Honda Civic 93-97 Honda Civic del Sol Control Arm Tierod Sway Bar on zeajans.com?

zeajans.com helps you to shop online and delivers Calvin Klein to your doorstep. The best-selling Calvin Klein on zeajans.com are: CKIN2U by Calvin Klein for Men – 1.7 oz EDT Spray Calvin Klein Men’s NP2211O993 Chromatic Micro 3-Pack Hip Brief Blue Size XL Calvin Klein Mens Underwear Hip Briefs 3 Pack Intense Power Cotton Stretch NEW Calvin Klein L10204 Men’s Cotton Classics 4-Pack Boxer Briefs Size S Calvin Klein Dress Womens 8 Blue Multicolor Geometric Jersey Shift Elbow Stretch Escape by Calvin Klein, 3.4 oz EDP Spray for Women NEW Girls Calvin Klein 3 Pack Sleep Pant Joggers. Hearts, Medium 10 – 12 Obsession by Calvin Klein 3pc Women’s Gift Set 3.4 oz EDP + Body Lotion + Mini 🩲NEW MEDIUM Calvin Klein Men’s Pride Micro Low Rise Trunk Cotton Candy Underwea CALVIN KLEIN Womens Scuba Short Sleeve Short Evening Fit + Flare Dress Calvin Klein Men’s 32mm Reversible Dress Belt with Plaque Buckle Calvin Klein Obsession 2.5 oz / 75 ml EDT Cologne for Men CK IN2U Him by Calvin Klein 3.4 oz Eau de Toilette Spray Calvin Klein Men’s Cotton Stretch Boxer Briefs 3-Pack Blue/Grey Size XL L63420 Calvin Klein Cotton Classics 3-Pack Boxer Brief Mens Size XL (40-42) Calvin Klein NB1900908 Cotton Classics 5-Pack Brief XL Calvin Klein Intense Power 3-Pack Microfiber Boxer Brief, Multi, Large Calvin Klein New CK One Nylon Black Heart Logo Hip Brief Underwear NB2224 071 M NWT Calvin Klein. Men’s. Modern Cotton Woven Boxer. Red. MSRP $28.00 Eternity by Calvin Klein for Men 3.4 oz Eau de Parfum Spray Original New In Box CALVIN KLEIN MICROFIBER HIP BRIEF 4 PACK, SIZE SMALL Calvin Klein Womens Chevron Work Office Wear Midi Dress BHFO 8479 Calvin Klein Women’s Fashion CK19560S-235 57mm Tortoise Sunglasses $$$Calvin Klein Size (Various) Sleepwear Lounge Shorts PRIDE NB2058-001 Calvin Klein Men’s LC Logo Graphic Casual Lifestyle T-Shirt SP40599673 MSRP $54.99 NWT CALVIN KLEIN MEN’S BLACK CREW NECK SHORT SLEEVE T-SHIRT S M L XL Calvin Klein Men’s Medium 1996 Micro BOXER BRIEFS NWT CALVIN KLEIN MICROFIBER 4-PACK LOW RISE MENS TRUNK UNDERWEAR #NP2446O-NWT Calvin Klein Men’s Cotton Stretch Holiday 5-Pack Low Rise Trunk Black Small Calvin Klein Men’s NB2592-924 Intense Power Micro 3 Pack Hip Brief, XS $$$Calvin Klein Mens(LARGE) Intense Power Low Rise Trunk NB3944-110 Calvin Klein Boxer Brief Underwear Muti Tie Dye Microfiber Logo 1996 NB3407322 New Large (36-38″) Calvin Klein Mens Reimagined Heritage Pride Micro Jock Strap Set Of 3 Calvin Klein Black Boxer Brief Underwear For Men Logo Waistband Medium NEW MEN’S “CALVIN KLEIN CLASSIC FIT 100% COTTON HIP BRIEF 4 PACK UNDERWEAR” 1 Calvin Klein Underwear Men Black CK NB3188 Modal Boxer Brief Size S (16) Calvin Klein Boys Boxer Brief Underwear Size XL 16-18 Cotton Stretch 2-PK MAN by Calvin Klein 3.4 / 3.3 oz edt eau de toilette Men CK Cologne 100 ml NIB Calvin Klein L78420 Men’s Multi Cotton Boxer Briefs 6-Pack Size M Calvin Klein Men’s Underwear Essentials Cotton Classic Fit 3-Pack Trunk NB1119 Calvin Klein Men’s Black 3-pack Cotton Stretch Hip Briefs Underwear SZ: L Men’s size small Calvin Klein boxer Briefs 3 Pack -navy blue/gray/red Calvin Klein Boxer Brief Size Medium 3 Pack Microfiber Stretch Classic Fit CALVIN KLEIN LIGHT Navy Blue LONG LEG Boxer Brief Microfiber SMALL NWT Calvin Klein Microfiber Men’s Hip Brief Underwear XLarge MINT FREESHIP! Calvin Klein Intense Power Men’s Boxer Trunk Underwear XLarge MINT FREESHIP! Calvin Klein Low Rise Trunk Underwear Microfiber Logo Band 1996 NB3406321 Ck One Hydrating Body Lotion by Calvin Klein 8.5 oz for Women Men New NWT CALVIN KLEIN MSRP $51.99 MEN’S NAVY SLEEPWEAR SLEEVELESS TANK TOP SIZE S M L Calvin Klein 3-Pack Modern Cotton Stretch Boxer Brief Classic CK Underwear WRB Calvin Klein Men’s CK19568S-001 Fashion 58mm Black Sunglasses NEW Calvin Klein CK One Micro Boxer Brief CK LOGO Print MENS S BLUE WHITE $26.00 Vintage Calvin Klein Long Maxi Dress Denim Button Up M NWT Long Sleeve 90s Y2K Calvin Klein 211CR03 Solid Cushion Crew Socks – 6 Pack (White O/S) NEW Calvin Klein Men’s Classic Fit Cotton Briefs 4-Pack White Size Small S NWT Calvin Klein Modern Performance Stretch Microfiber Brazilian Panty #QF7114 Calvin Klein CK mens biege contoured pouch microfiber brief Underwear S M CALVIN KLEIN Fleece Pajama Lounge Sleep Pants Medium Black Allover Logo MSRP$42 Calvin Klein Cotton Classic Fit 3-Pack Big Boxer Brief Men’s Size 2XL _A4 NEW Calvin Klein Logo Band Ultra Soft Modal Boxer Brief Underwear NB1797642 MD NWT. Calvin Klein. 5 Pack. Pride Stretch Jock Strap. Multicolor. MRSP. $71.50 CALVIN KLEIN Men’s Button Boxer Brief Cotton Stretch 3 Pack White XL Classic Calvin Klein CK Mens Modern Cotton Stretch Thong Size L Black Calvin Klein Women’s High Rise Straight Leg Jeans Jet Black Size 6,8,10,12,14 4 Calvin Klein Hip Briefs Cotton 4 Pack Blue Men’s Underwear Classic Fit NWT Calvin Klein ICON Logo Band Microfiber Boxer Brief Underwear NB2541 801 Small OBSESSION by CALVIN KLEIN for Men 3.4 oz 100 ml ALL OVER BODY WASH New As Pic* Calvin Klein Men’s Wrinkle Free Dress Shirt, White&Blue&Gold, L (16-16.5, 34/35) CALVIN KLEIN Black LOGO Strap Modern Cotton Bodysuit MEDIUM NWT 3-Pack Calvin Klein Mens 100% Cotton Briefs Classic Fit Underwear Size XXL 2XL Calvin Klein Logo Sleepwear Dress gown sleep shirt Size M Navy Calvin Klein Mens Relaxed Fit Standard Logo Crewneck T-Shirt Blue L Eternity Flame by Calvin Klein 1.7 oz EDP spray womens perfume 50 ml NIB Calvin Klein 1996 V-Day Cotton Stretch Modern Bikini – QF7480 CK IN2U for Her Calvin Klein EDT Perfume for Women 3.4 oz New In Box Calvin Klein Nacy Rectangular Men’s Sunglasses CK19539S 410 59 CK19539S 410 59 Calvin Klein Women’s 2 Pack Microfiber Wirefree Bra, Nymphs/Grey, Size S Calvin Klein Tee Shirt Men’s Size Medium Short Sleeve Classic Fit Crew White Calvin Klein Microfiber Monogram Low Rise Trunk 1 Pack Black Gray S-XL NEW Calvin Klein Microfiber Men’s Hip Brief Underwear Medium MINT FREESHIP! Mens Size M Calvin Klein Underwear Boxer Briefs 3-Pack Pure Cotton Stretch Blend Calvin Klein NB2613952 Beige Gray Cotton Stretch 3 Pack Hip Briefs Underwear 2XL CALVIN KLEIN *LOW RISE TRUNK* Microfiber (3 Pack L) Black-SEALED BOX-New❤️ Calvin Klein CK 4 Pack V-Neck T-Shirt White or Black Small Medium X-Large Cotton Calvin Klein Reconsidered Comfort Cotton Blend Green Boxer Brief NB2688 301 S CALVIN KLEIN ENDLESS DEEP EUPHORIA BLUSH 1.2ml .04oz PERFUME SAMPLES TRY ALL 4 NWT Calvin Klein Men’s Future Shift Micro Boxer Brief Charcoal Size Small Obsession by Calvin Klein 1.7 oz EDP Perfume for Women New In Box New in Box Calvin Klein CK One NB2226497 Microfiber Boxer Brief Underwear S ETERNITY by Calvin Klein for Men 5.3 oz All Over Body Spray NEW 100% AUTHENTIC Calvin Klein Briefs Classics Fit Briefs 100% Cotton 3-Pack White Small NIB b1 Three Pack Calvin Klein Men’s Ultra Soft Modern Trunk, Black, Medium Eternity Flame by Calvin Klein 3.4oz Eau de Toilette for Men NEW SEALED Box Calvin Klein Steel Microfiber Boxer Brief – NB1620 – Blue – Size Medium 10 Calvin Klein DEFY EDT sample spray 0.04 oz on cards NEW 10 pack Calvin Klein CK men tuffet brown steel low rise trunk underwear size S M Calvin Klein Womens Long Sleeve Crew Neck & Pant Set Red Blue Gray Black XS-L Calvin Klein Printed Faux Wrap Dress CD8A332R (Aubergine Multi) Women’s Dress 12 Calvin Klein Ultra Soft Modern Trunk, Nirvana, Large Calvin Klein Intense Power 3-Pack Microfiber Low Rise Trunk, Multi, Large Mens Pullover Fleece Hoodie